Mute-Out Packages
Press Brake Controls
Press Brakes - Reference Package #130
PB Package #130PB interfaces directly on air clutch and
hydraulic press brakes when these machines have control reliability
and component monitoring. The mute out function is activated by the calibrated
switch actuator No. 300 and gives the operator the capability to
work with small parts and workpieces that have flanges.
Always submit machine electrical schematics to assure proper
point of interface. Specify air clutch or hydraulic machine
application. Add suffix AC for air clutch press brake or suffix HV for
hydraulic press brake.
Package #130PB-HY (Hydraulic Machine) Includes the following components: 1) Control Panel -
NEMA 12 Enclosure
2) No. 300 Calibrated Switch Actuator
3) No. 301 Limit Switch (1)
Package #130PB-AC (Air Clutch Machine) Includes the following
components: 1) Control Panel - NEMA 12 Enclosure
2) No. 300 Calibrated Switch Actuator
3) No. 301 Limit Switchs (3)
Operational Description - Package
#130
The Mute-Out Package #130 has been designed to allow the SuperLight VI or VII
infrared light curtain to be muted out or bypassed during the non-hazardous portion of the machine cycle. The
mute-out function is actuated by the No. 301 limit switch and the No. 300 adjustable calibrated switch actuator
when the die is within 1/4" (6.35mm) of the pinch point and continues until the ram returns to top stop. At this
point the infrared light curtain reactivates and gives protection during the hazardous portion of the
downstroke.
Options
Select-O-Stop (Option for Package
#130PB)
Select-O-Stop is an option for Package #130PB. Select-O-Stop is a keyed function
(on/off) that is activated by the calibrated switch actuator mounted on the side of the ram. Select-O-Stop will
allow the operator to bring the ram down at a fast speed to a preset position which is 1/4" (6.35mm) above the
material to be formed. At this point the ram will stop and then the light curtain mute out will begin. The
Select-O-Stop function is ideal for small part forming or realignment of the work piece. Add suffix SOS to Package
#130PB for this feature.
Note: For the Select-O-Stop Option, please add the suffix SOS to the Package
Number.
|